MAXIMAL3RH
Features:
- 115VAC 60Hz., 1.9A.
- Normally closed [NC] or normally open [NO] dry contact inputs (switch selectable).
- 12VDC or 24VDC @ 6A total output current.
- Eight (8) fuse protected outputs.
- Maximum current per ACM8R-M output is 2.5A.
- Individually selectable Mag Lock/Strike (Fail-Safe, Fail-Secure) solid state fuse protected outputs.
- Thermal and short circuit protection with auto reset.
- Latching or Non-Latching fire alarm reset switch individually selectable for each output.
- Remote reset capability for latching Fire Alarm Interface mode.
- a) Normally open [NO] or normally closed [NC] dry contact input.
- b) Polarity reversal input from FACP signaling circuit.
- Individual Output Status LEDs located on the front panel.
- Built-in charger for sealed lead acid or gel type batteries (if batteries are required install separate enclosure).
- Automatic switch over to stand-by battery when AC fails.
- Zero voltage drop when unit switches over to battery backup (AC failure condition).
- AC fail supervision (form ''C'' contacts).
- Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
- Low battery and battery presence supervision (form ''C'' contact).
- Removable terminal blocks with locking screw flange.
- 3-wire line cord.
- Illuminated master power disconnect circuit breaker with manual reset.
- Relative Humidity 85% +/- 5%.
- 12VDC: 37 BTU/Hr.
- 24VDC: 74 BTU/Hr.
- System AC input VA requirement: 218.5VA.